Rangemaster U109948 User Manual download pdf (Page 17)

‘Cook & Clean’ Panels

The main oven has side ‘Cook & Clean’ panels which have

been coated with a special enamel that partly cleans itself.

This does not stop all marks on the lining, but helps to reduce

the amount of manual cleaning needed.

These panels work better above 200°C. If you do most of your

cooking below this temperature, occasionally remove the

panels and wipe with a lint free cloth and hot soapy water.

The panels should then be dried and replaced and the oven

heated at 200°C for about one hour. This will ensure that the

panels are working eﬀectively.

Removing the Panels to clean the Enamel

Interior

If you wish to clean the enamel interior of the oven, you will

ﬁrst need to remove the shelves.

On some models the main oven has a removable oven roof.

Slide the roof liner forwards and remove (Fig.5-3).

Each side of the oven is ﬁxed with four ﬁxing screws. You do

not have to remove the screws to remove the oven panels.

Simply lift each side panel upwards, slide them oﬀ the screws

and then pull them forwards (Fig.5-4).

Once the panels have been removed, the oven enamel

interior can be cleaned.

DO NOT use steel wool, oven cleaning pads, or any other

materials that will scratch the surface.

ArtNo.320-0025 - Oven roof -removing

Fig.5-3

ArtNo.320-0008 Removing the oven lining

Fig.5-4

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

No comments

Rangemaster U109948 User Manual Page 17