Rangemaster Professional Deluxe 100 Dual Fuel User's Guide download pdf (Page 32)

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.

ArtNo.311-0010 Injectors

A – Jet, B – Internal injector, C – External injector

ArtNo.0102-0011 - Screwing

the control valve bypass screw

ArtNo.270-0032 - 90 Prof+ FX - Removing the control panel

Check the ‘Technical Data’ section at the back of the book

that the hob is convertible to the gas you want to use.



A suitably competent person must perform the

conversion. After conversion the installation must

comply with the relevant regulations and also the

local electricity supply company requirements. Read

the instructions before converting this appliance.



Failure to convert the appliance correctly could

invalidate any warranty or liability claims and lead

to prosecution.



When servicing or replacing gas-carrying

components disconnect from the gas supply before

starting operation. Check the appliance is gas sound

after completion.



DO NOT use reconditioned or unauthorised gas

controls.



Disconnect from the electricity supply before

servicing.



Before electrical reconnection, check that the

appliance is electrically safe.

Injectors

Remove the burner caps and heads. Remove the old jets

(Fig. 8.1). Fit the new jets (see ‘Technical Data’ for the correct

jets). Reassemble in the reverse order.

Tap Adjustment

Removing the Control Panel

Remove the 3 xing screws underneath the control panel

(Fig. 8.2).

The control panel will drop down slightly. It is held

at the top by three holes in the top edge that locate on the

tags on the inner panel (Fig. 8.3). Lift the control panel clear

of the tags and pull forwards, taking care not to damage or

strain the wiring.

Bypass Screw Adjustment

Turn the bypass screw on each control clockwise until it stops

(Fig.8-3). Ret the control panel and control knobs.

Stick on Label

Stick the LP gas label over the natural gas part of the

appliance data label.

Pressure Testing

Connect the appliance to the gas supply.The gas pressure can

be measured at one of the hotplate burner jets (not the wok

burner). Lift o a burner head. Fit the pressure gauge to the

jet. Turn on and light one of the other burners with a match.

Turn on and press in the control knob for the burner with

the pressure gauge tted. After checking the pressure, turn

o the taps and replace the burner head.Reassemble burner

top, making sure it is reassembled in the correct way on the

burner body. Check the appliance is gas sound. Check

operation of all the burners.

8. Conversion to LP Gas

Fig. 8.1

Fig. 8.2

Fig. 8.3

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Rangemaster Professional Deluxe 100 Dual Fuel User's Guide Page 32

Comments to this Manuals

Related products and manuals for Cookers Rangemaster Professional Deluxe 100 Dual Fuel