Rangemaster 110 Ceramic User's Guide download pdf (Page 27)

INSTALLATION

Check the appliance is electrically safe when you have nished.

Electrical Connection

The cooker must be installed by a qualied electrician, in

accordance with all relevant British Standards/Codes of

Practice (in particular BS 7671), or with the relevant national

and local regulations.

Current Operated Earth Leakage Breakers

The combined use of your cooker and other domestic

appliances may cause nuisance tripping, so we

recommend that the cooker is protected on an individual

RCD (Residual Current Device) or RCBO (Residual Current

Breaker with Overload).

IF IN DOUBT, PLEASE CONSULT A SUITABLY QUALIFIED

ELECTRICIAN.



WARNING: THIS APPLIANCE MUST BE EARTHED.

Note: The cooker must be connected to the correct electrical

supply as stated on the voltage label on the cooker, through

a suitable cooker control unit incorporating a double-pole

switch, having a contact separation of at least 3 mm in all

poles.



The cooker MUST not be connected to an ordinary

domestic power point.

Access to the mains terminal is gained by removing the

electrical terminal cover box on the back panel. Connect the

mains cable to the correct terminals for your electrical supply

type (Fig.7-8 and Fig.7-9). Check that the links are correctly

tted and that the terminal screws are tight.

Final Checks

Hob Check

Check each cooking zone in turn. Be sure to use pans of the

correct size and material.

Oven Check

Set the clock as described earlier in the instructions, and then

turn on the ovens. Check that the oven fans start to turn and

that the ovens start to heat up.

Final Fitting

Fitting the Plinth

Loosen the 3 screws along the front bottom edge of the

cooker. Hook the central keyhole over the central screw. Twist

and t each end keyhole over their respective screws. Tighten

the xing screws (Fig.7-10).

Customer Care

Installer: Please complete your details in this guide, inform

the user how to operate the cooker and hand over the

instructions.

Thank you.

ArtNo.130-0010 Electrical connections single-phase

230 V ac 50 Hz

10 mm² max

6 mm² max

3N ac

230/400 V 50 Hz

6 mm² max

10 mm² max

Fig.7-8

Fig.7-9

ArtNo.000-0006 - Securing the 110 plinth

Fig.7-10

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Rangemaster 110 Ceramic User's Guide Page 27

Comments to this Manuals

Related products and manuals for Ovens Rangemaster 110 Ceramic