Rangemaster Classic 90 Dual Fuel User's Guide download pdf (Page 25)

INSTALLATION

Check the appliance is electrically safe and gas sound when you have nished.

Conversion to Another Gas

If the appliance is to be converted to another gas do the

conversion at this point. See the conversion section of these

instructions.

Levelling

You are recommended to use a spirit level on a shelf in one of

the ovens to check for level.

Place the cooker in its intended position taking care not to

twist it within the gap between the kitchen units as damage

may occur to the cooker or the units.

The front feet and rear rollers can be adjusted to level the

cooker.

To adjust the height of the rear of the cooker use a 13 mm

spanner or socket wrench to turn the adjusting nuts at the

front bottom corners of the cooker.

To set the front, turn the feet bases to raise or lower.

Fitting the Handles and Handrail

Remove the 4 mm Allen screws from the doors (Fig. 7.10). Fit

the door handles and secure using the 4 mm screws

(Fig. 7.11).



The handles should be above the xings.

Remove the 4 mm Allen screws from the top corners of the

fascia (Fig. 7.12). Fit the handrail in position and secure using

the 4 mm screws.

ArtNo.210-0006 - Classic fitting the handles 2

ArtNo.215-0026 - Handle gaskets fixed

Art No 215-0028 - Handrail fascia fixings

Fig. 7.10

Fig. 7.11

Fig. 7.12

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

No comments

Rangemaster Classic 90 Dual Fuel User's Guide Page 25